A metal mesh etching service forms filters and screens with uniform apertures and no woven nodes — stainless, nickel, copper and brass.

Shim chemical etching removes metal without stress or heat — burr-free shims with clean edges, flat stock and repeatable depth across batches.

Custom mesh etching draws aperture patterns into metal — slots, hexagons and logos at no extra cost, from 0.02 mm foil to 1.5 mm plate.

A shim etching service produces burr-free thin metal shims and washers with tight tolerances — stainless, copper and brass from 0.03 mm.

Custom nameplate etching turns your artwork into durable metal plates — logos, faceplates and asset tags with no tooling cost and fast samples.

Nameplate chemical etching cuts graphics and serials into aluminum and stainless — burr-free, paint-filled, built to outlast printed labels.

Mesh chemical etching forms uniform apertures in stainless, nickel and copper — 0.02 to 1.5 mm stock, no woven nodes, no burrs.

Custom shim etching cuts burr-free metal shims to ±0.05 mm — stainless, copper, brass and nickel from 0.03 to 1.5 mm, no tooling cost.

A mesh etching service produces burr-free metal mesh with uniform apertures, smooth edges and no woven joints — in stainless, nickel, copper and brass.

A nameplate etching service produces burr-free metal tags with sharp graphics, crisp serial numbers and durable finishes — aluminum, stainless, brass, copper.

Photochemical etching delivers burr-free, stress-free sensor parts — strain gauge grids, diaphragms, shims and electrodes — with micron-level repeatability.

Ultra-thin reel-to-reel etching for encoders delivers micron-accurate, burr-free encoder discs and scales at high volume — precision optical feedback components for motion control.