High-precision metal component manufacturer

Consulting hotline

+086 0755-2708-8292 / 18938693455
Etched Nickel Frame for Semiconductor Stencil
Release Date:2026-11-16

Etched Nickel Frame for Semiconductor Stencil

Overview

An etched nickel frame for a semiconductor stencil is the support tooling that locates and carries an electroformed bumping stencil during wafer-level plating. The stencil itself is made by electroforming nickel or a nickel-cobalt alloy onto a mandrel, which builds the fine bump apertures without any cutting force; photo chemical etching is reserved only for the accessory parts — the positioning frame and the support mask — where the outline and openings are imaged onto metal foil and the unprotected metal is dissolved away. This division lets each part use the process that fits it: electroforming defines the stencil apertures, while chemical etching forms the flat, burr-free frame and mask that hold and align the stencil.

For packaging engineers, the etched frame solves a tooling iteration problem rather than a stencil precision problem. A bump-pattern change means new frame openings and a revised mask, and with photo chemical etching that is a data change rather than a new stamping die. Every frame on the panel etches at the same rate, so thickness and outline stay consistent from first article to volume run, and the accessory tooling can follow the bump layout without re-tooling the stencil itself.

Parameter Window

  • Accessory Materials: SUS304 / 304L / 301 / 316L / 420J2 / 7C27MO2 stainless foil or nickel foil for frames and masks; the stencil body is electroformed nickel or nickel-cobalt alloy only
  • Thickness Range: accessory etched parts 0.01–2.0 mm; stencil thickness is designed separately from aperture volume and bump height
  • Tolerance: etched accessory tolerance scales with foil thickness and the electroformed stencil aperture tolerance depends on product structure — values are for reference only, actual accuracy depends on the specific geometry
  • Minimum Feature: locating holes, datums and mask openings are artwork-defined rather than tool-defined; fine-pitch capability is confirmed at artwork review
  • Surface Options: as-etched bright finish, cleaned and passivated, deburred and protective-film packed
  • Compliance: ISO 9001 process control, RoHS/REACH material traceability

Manufacturing Process / Workflow (8 Steps)

  1. Drawing Review — Convert the bump array and stencil outline into vector artwork, and check accessory hole positions against electroformed apertures and datums.
  2. Stencil Electroforming — Deposit nickel or nickel-cobalt alloy onto a mandrel to build the bumping stencil with fine apertures, then strip and inspect the openings.
  3. Material Prep — Select SUS or nickel foil for the frame and mask, shear to panel size and inspect both faces for scratches.
  4. Cleaning & Lamination — Degrease and de-oxidize, then hot-roll dry film on both faces so no bubble sits under a fine locating hole.
  5. Double-Sided Exposure — Image the frame and mask pattern with LDI on both faces, holding front-to-back registration.
  6. Controlled Etching — Spray chemistry matched to the foil grade; time, temperature and line speed govern etch depth and edge quality, forming the positioning frame and support mask.
  7. Stripping & Cleaning — Remove resist, neutralize and passivate, then inspect that edges are free of burr and residue.
  8. Fit & Inspection — Verify accessory outline and hole positions by AOI and flash measurement, trial-fit the frame to the electroformed stencil, and pack with first-article data.

Core Advantages

  1. Clear division of labour: electroforming holds the fine stencil apertures while etching forms the locating and carrying accessories.
  2. Stable registration: the etched frame is flat and stress-free, so it does not warp the electroformed stencil when clamped.
  3. Revisions without tooling: frame and mask openings are artwork-defined, so a bump-array change needs no new die.
  4. Clean edges: chemical removal leaves no rolled burr, so the accessory cannot scratch or lift the stencil.
  5. Fast sampling: a new layout is a new data set, shortening the loop to first-article fit trials.
  6. Scale flexibility: the same route supports prototypes and volume runs, with traceability from foil lot to part.

Typical Applications

  • Wafer bumping frames: etched frames that hold and locate electroformed nickel bumping stencils.
  • Bumping support masks: etched masks that define the plating area around electroformed apertures.
  • Flip-chip tooling: accessory locating and carrying foils used in bumping steps.
  • Fine-pitch prototypes: small-batch etched accessories for bump-array trials.
  • Wafer carrier shims: related flat, burr-free foils used inside packaging carriers.
  • Volume fit parts: consistent frames and masks for production bumping lines.

Design Notes & Process Considerations

  1. Datum scheme: state how stencil apertures map to frame datums, together with the fit tolerance.
  2. Opening layout: round internal corners and avoid isolated narrow tabs that can distort during etching.
  3. Flatness: call out flatness on the face that meets the electroformed stencil, not only the outline.
  4. Edge quality: specify burr-free as a functional requirement where the accessory touches the stencil.
  5. Surface finish: choose as-etched, passivated or film-packed finish for the packaging environment.
  6. Complete data: give foil grade, thickness, opening layout and surface together to cut back-and-forth confirmation.
Consult Message
TOP