
Overview
Custom sound mesh for home appliances photo chemical etching produces the fine perforated grilles and acoustic screens that sit over speakers, buzzers and microphones in household appliances. Rather than drilling or punching, the aperture pattern is transferred from artwork onto thin stainless foil and the exposed metal is dissolved chemically, leaving a clean, burr-free mesh with a high density of small, evenly spaced holes. Photo chemical etching keeps every opening free of the rolled edges and slack that stamping leaves behind, so the mesh passes sound with consistent resistance and without rattling inside the housing.
For appliance acoustic designers, sound mesh etching removes several constraints of woven wire or punched plate. Woven mesh has variable wire crossings that shift the open area; punched foil leaves burrs that can buzz against the housing and limits how small a hole can be; and each pattern change needs new tooling. With photo chemical etching the hole layout lives in the artwork, so a revised open-area ratio or a new aperture shape is a data change, and every mesh on the panel etches at the same rate for uniform acoustic performance from sample to volume.
Parameter Window
- Available Materials: SUS304 / 304L / 301 / 316L stainless foil, chosen for corrosion resistance and stiffness in humid appliance environments
- Material Thickness Range: 0.01–2.0 mm; thin foil is typical for speaker grilles and microphone covers
- Tolerance: dimensional tolerance scales with material thickness and is for reference only — actual accuracy depends on the part structure, hole diameter and foil grade
- Minimum Feature: fine apertures and slot patterns are defined in the artwork rather than by tooling; lower limits are confirmed at artwork review
- Surface Options: as-etched bright finish, cleaned and passivated, or blackened for a low-glare grille appearance
- Compliance: ISO 9001 process control, RoHS/REACH material traceability
Manufacturing Process / Workflow (8 Steps)
- Drawing Review — Convert the acoustic open-area and hole-layout drawing into vector artwork, and check aperture diameter, pitch and ligament against foil thickness.
- Material Prep — Select SUS foil for stiffness and corrosion resistance, shear to panel size and inspect both faces for scratches or rolled-in marks.
- Cleaning & Lamination — Degrease and de-oxidize the foil, then hot-roll dry film on both faces so no bubble covers a fine aperture.
- Double-Sided Exposure — Image the perforation pattern with LDI on both faces, holding front-to-back registration across the mesh field.
- Development — Wash away unexposed resist to open the areas to be dissolved, and rework any hole that still shows residual film.
- Controlled Etching — Spray chemistry matched to the stainless grade; time, temperature and line speed govern etch depth, hole wall and edge quality.
- Stripping & Cleaning — Remove resist, neutralize and passivate or blacken, then inspect that every aperture is open and free of burr and residue.
- AOI / Flash Inspection — Verify hole count, open area and flatness against the approved sample by AOI, then pack with first-article data.
Core Advantages
- Burr-free apertures: Chemical removal leaves no rolled edge, so the grille does not buzz or snag during assembly.
- Fine, dense hole patterns: Small apertures and tight pitch are artwork-defined, allowing a high open area for clear sound.
- Uniform open area: Every mesh on the panel etches at the same rate, keeping acoustic resistance consistent from part to part.
- Flat and stress-free: No stamping force means the mesh stays flat and does not warp in the housing.
- Fast sampling: A revised hole layout is a new data set, shortening the loop from acoustic concept to first articles.
- Scale flexibility: The same route supports prototype quantities and volume runs, with traceability from foil lot to packed mesh.
Typical Applications
- Speaker grille mesh: Fine perforated covers for appliance speakers and soundbars.
- Microphone protection screens: Acoustic mesh that shields appliance microphones while passing voice.
- Buzzer and alarm covers: Perforated foil that lets alarm tones out without dust ingress.
- Fan and vacuum acoustic liners: Mesh layers that damp airflow noise in household appliances.
- Prototype acoustic screens: Small-batch meshes for open-area and listening trials before tooling is committed.
- Replacement grille components: Consistent meshes for aftermarket appliance repair.
Design Notes & Process Considerations
- Open-area callout: State the target open-area ratio together with hole diameter and pitch.
- Ligament width: Keep enough metal between apertures so thin webs do not distort during etching.
- Hole layout at edges: Avoid tiny isolated holes near the mesh border that can etch unevenly.
- Flatness requirement: Specify flatness on the grille face, since a warped mesh can rattle in the housing.
- Surface finish: Choose as-etched, passivated or blackened finish according to the appliance appearance.
- Complete drawing data: Give foil grade, thickness, open area, hole layout and surface together to cut back-and-forth confirmation.
