High-precision metal component manufacturer

Consulting hotline

+086 0755-2708-8292 / 18938693455
Encoder Disc Etching for Smartwatches
Release Date:2026-11-16

Encoder Disc Etching for Smartwatches

Overview

Prototype encoder disc for smartwatches photo chemical etching produces the fine-slot code wheels that translate the rotation of a crown or bezel into digital signals inside a smartwatch. Instead of cutting or laser drilling, the radial slot pattern is imaged onto thin metal foil and the unprotected metal is dissolved chemically, leaving a clean disc with precise, burr-free slots. Photo chemical etching keeps each slot edge sharp and stress-free, so the optical or magnetic sensor reads a steady pulse as the disc turns.

For wearable motion designers, encoder disc etching removes the limits of stamped or machined wheels. A stamped disc carries a rolled burr and residual stress that can warp a thin code wheel; machining fine radial slots in a tiny disc is slow and leaves a heat-affected edge; and every pattern change requires new tooling. With photo chemical etching the slot pattern lives in the artwork, so a revised slot count or pitch is a data change, and every disc on the panel etches at the same rate for consistent sensing from sample to volume.

Parameter Window

  • Available Materials: SUS304 / 301 / 316L stainless foil and 420J2, selected for wear, spring response and corrosion resistance near the crown
  • Material Thickness Range: 0.01–2.0 mm; thin foil is typical for code wheels inside compact watch movements
  • Tolerance: dimensional tolerance scales with material thickness and is for reference only — actual accuracy depends on the part structure, slot width and foil grade
  • Minimum Feature: fine slots and index marks are defined in the artwork rather than by tooling; lower limits are confirmed at artwork review
  • Surface Options: as-etched bright finish, cleaned and passivated, or blackened to improve optical contrast for sensing
  • Compliance: ISO 9001 process control, RoHS/REACH material traceability

Manufacturing Process / Workflow (8 Steps)

  1. Drawing Review — Convert the slot-count and pitch drawing into vector artwork, and check slot width, radial length and spacing against foil thickness.
  2. Material Prep — Choose SUS foil for wear and spring response, shear to panel size and inspect both faces for scratches or rolled-in marks.
  3. Cleaning & Lamination — Degrease and de-oxidize the foil, then hot-roll dry film on both faces so no bubble sits under a fine slot.
  4. Double-Sided Exposure — Image the radial slot pattern with LDI on both faces, holding front-to-back registration for the code track.
  5. Development — Wash away unexposed resist to open the areas to be dissolved, and rework any slot that still shows residual film.
  6. Controlled Etching — Spray chemistry matched to the stainless grade; time, temperature and line speed govern etch depth, slot wall and edge quality.
  7. Stripping & Cleaning — Remove resist, neutralize and passivate or blacken, then inspect that every slot is open and free of burr and residue.
  8. AOI / Flash Inspection — Verify slot count, pitch and concentricity against the approved sample by AOI, then pack with first-article data.

Core Advantages

  1. Clean slot edges: Chemical removal leaves no rolled edge, so the sensor reads a clean transition with no false pulse.
  2. Fine, high-count patterns: Many narrow radial slots are artwork-defined, giving fine angular resolution in a small disc.
  3. Consistent pitch: Encoder disc etching etches the whole panel at the same rate, keeping the code track uniform from part to part.
  4. Flat and stress-free: No stamping force means the disc stays flat and does not warp on its hub.
  5. Fast sampling: A revised slot count or pitch is a new data set, shortening the loop from watch concept to first articles.
  6. Scale flexibility: The same route supports prototype quantities and volume runs, with traceability from foil lot to packed disc.

Typical Applications

  • Smartwatch crown encoder discs: Code wheels that translate crown rotation into user input.
  • Rotating bezel code wheels: Fine-slot discs for ring and bezel gesture sensing.
  • Prototype encoder discs: Small-batch wheels for slot-count and sensing trials before tooling is committed.
  • Wearable motor feedback discs: Slotted discs for haptic or motor position feedback in watches.
  • Sensor index tracks: Discs carrying index marks for optical or magnetic sensing.
  • Replacement encoder components: Consistent discs for aftermarket smartwatch repair.

Design Notes & Process Considerations

  1. Slot-count callout: State the target slot count, angular pitch and code-track radius together.
  2. Slot width and spacing: Keep enough metal between slots so thin webs do not distort during etching.
  3. Optical contrast: Specify a blackened finish where an optical sensor reads the slot pattern.
  4. Concentricity: Call out concentricity between the code track and the hub bore so the pulse stays even.
  5. Flatness requirement: Specify flatness on the disc face so it runs true as the crown turns.
  6. Complete drawing data: Give foil grade, thickness, slot count, pitch and surface together to cut back-and-forth confirmation.
Consult Message
TOP