Common stainless steel products surface pattern are rich in process embodiment, so we understand the surface pattern processing methods are?

1、Chemical corrosion

   Chemical corrosion process namelyEtching process，Its advantage is that the pattern can be taken rich with a strong effect, the existence of the disadvantage is the complexity of the processing process, the processing process due to artificial and unclear drawings will lead to a high rate of scrap, is not conducive to the use of products.Zollida Electronics onStainless steel etchingWith a wealth of practical experience, the generation of etching solution has a certain degree of environmental pollution, but Zhuolida ElectronicsStainless steel precision etchingThere is no such problem, mainly because the process of etching stainless steel products to establish a complete set of environmental protection system, as far as possible to protect the environment and guarantee the delivery date.

2、Pneumatic Marking

   The tip of tungsten steel is used to generate high frequency vibration under the action of compressed gas to form a crater on the surface of the part to produce marking. The marking depth of 0.02~1mm can be made to meet various depth requirements by this process. It is relatively simple in operation and maintenance, but lacks rich color configuration and can only do the color of the substrate material.

3、Screen Printing

   Using a squeegee for extrusion, the ink is transferred to the substrate through the graphics section, forming the same graphics as the original. The process is the least expensive and simple to operate and adaptable, but the pattern color does not reach permanence.