High-precision metal component manufacturer

Consulting hotline

+086 0755-2708-8292 / 18938693455
Etched Carrier Plate for Memory Packaging
Release Date:2026-11-16

Etched Carrier Plate for Memory Packaging

Overview

An etched carrier plate for memory packaging is the thin tray that carries electroformed parts through HBM and stacked-die assembly steps. The packaging components themselves — the fine interposer features, word-line structures and micro connect elements — are produced by electroforming nickel or a nickel-cobalt alloy on a mandrel, so they grow by deposition and are never cut or etched away. Photo chemical etching is used only for the companion carrier plate and tray: a thin metal foil is imaged and the unprotected areas are dissolved chemically to leave pockets, datum edges and vent openings. Keeping the two routes distinct matters — electroforming defines the functional component, while chemical etching defines the flat, clean carrier that holds and locates it.

For packaging engineers, the etched carrier is the tooling that changes most often as the die stack, package outline and test layout move. The electroformed component follows its own deposition route, but the carrier pocket geometry and fiducials can be revised simply by editing the artwork. Photo chemical etching keeps the pocket walls free of burr and stress, and because every tray on the panel etches at the same rate, thickness and outline stay consistent from first article through volume build-up.

Parameter Window

  • Carrier Materials: SUS304 / 304L / 301 / 316L / 420J2 / 7C27MO2 stainless foil, titanium TA1 / TA2 / TC4 or copper C1100 for the etched carrier tray; the packaged component is electroformed nickel or nickel-cobalt alloy only
  • Thickness Range: etched carrier and tray parts 0.01–2.0 mm; the electroformed component thickness is designed separately from stack height and package layout
  • Tolerance: etched carrier tolerance scales with foil thickness and the electroformed feature tolerance depends on product structure — values are for reference only, actual accuracy depends on the specific geometry
  • Minimum Feature: pockets, vent slots and fiducials are artwork-defined rather than tool-defined; minimum spacing is confirmed at artwork review
  • Surface Options: as-etched bright finish, cleaned and passivated, deburred and protective-film packed
  • Compliance: ISO 9001 process control, RoHS/REACH material traceability

Manufacturing Process / Workflow (8 Steps)

  1. Drawing Review — Convert the package outline and die-stack footprint into vector artwork, and check carrier pockets against the electroformed component outline and datums.
  2. Component Electroforming — Deposit nickel or nickel-cobalt alloy onto a mandrel to build the packaging component, then strip and inspect; hardness is set by the plating process and is not an adjustable callout.
  3. Material Prep — Select SUS, titanium or copper foil for the carrier tray, shear to panel size and inspect both faces for scratches.
  4. Cleaning & Lamination — Degrease and de-oxidize, then hot-roll dry film on both faces so no bubble sits under a pocket or vent slot.
  5. Double-Sided Exposure — Image the carrier pattern with LDI on both faces, holding front-to-back registration for the pockets and fiducials.
  6. Controlled Etching — Spray chemistry matched to the foil grade; time, temperature and line speed govern etch depth and edge quality, forming the pockets and vents of the carrier tray.
  7. Stripping & Cleaning — Remove resist, neutralize and passivate, then inspect that pocket walls are free of burr and residue.
  8. Fit & Inspection — Verify pocket outline and fiducial positions by AOI and flash measurement, trial-seat the electroformed component in the carrier, and pack with first-article data.

Core Advantages

  1. Clear division of labour: electroforming defines the functional packaging component while etching forms the carrier tray and its pockets.
  2. Pockets without tooling: carrier pockets and vents are artwork-defined, so a package-layout change needs no new die.
  3. Burr-free seating: chemical removal leaves no rolled edge, so the carrier cannot scratch the electroformed component.
  4. Flat and stress-free: the etched tray stays flat and locates the component without warping it.
  5. Fast sampling: a revised stack is a revised data set, shortening the loop to first-article fit trials.
  6. Scale flexibility: the same route supports prototypes and volume runs, with traceability from foil lot to part.

Typical Applications

  • HBM carriers: etched trays that hold electroformed high-bandwidth-memory components during stacking.
  • Package pockets: etched foils that form clean seating pockets for stacked-die assemblies.
  • Fiducial carriers: accessory trays carrying alignment marks for memory packaging.
  • Stack prototypes: small-batch etched carriers for die-stack and outline trials.
  • Test carriers: related flat, burr-free foils used inside test and handling trays.
  • Volume fit parts: consistent carrier trays for production memory lines.

Design Notes & Process Considerations

  1. Fiducial scheme: state how the component outline maps to carrier pockets and fiducials, together with the fit tolerance.
  2. Pocket layout: round internal corners and avoid isolated narrow tabs that can distort during etching.
  3. Flatness: call out flatness on the face that seats the electroformed component, not only the outline.
  4. Edge quality: specify burr-free as a functional requirement where the pocket wall meets the component.
  5. Surface finish: choose as-etched, passivated or film-packed finish for the packaging environment.
  6. Complete data: give foil grade, thickness, pocket layout and surface together to cut back-and-forth confirmation.
Consult Message
TOP