-
Release Date：2026-11-02Custom Lead Frame Etching for Semiconductor PartsCustom lead frame etching cuts burr-free semiconductor lead frames in copper and alloy 42 — fine pitch, clean edges, no tooling cost. -
Release Date：2026-11-02Surgical Blade Etching Service for Medical BladesA surgical blade etching service produces clean-edged medical blades and components in stainless and specialty alloys, with full traceability. -
Release Date：2026-11-02Filter Mesh Etching Service for Filter DiscsA filter mesh etching service produces filter discs with controlled aperture and open area — flat, burr-free mesh for fuel, air and fluid systems. -
Release Date：2026-11-02Metal Mesh Etching Service for Filters & ScreensA metal mesh etching service forms filters and screens with uniform apertures and no woven nodes — stainless, nickel, copper and brass. -
Release Date：2026-11-02Shim Chemical Etching for Burr-Free Metal ShimsShim chemical etching removes metal without stress or heat — burr-free shims with clean edges, flat stock and repeatable depth across batches. -
Release Date：2026-11-02Custom Mesh Etching for Etched Mesh & Filter PartsCustom mesh etching draws aperture patterns into metal — slots, hexagons and logos at no extra cost, from 0.02 mm foil to 1.5 mm plate. -
Release Date：2026-11-02Shim Etching Service for Metal Shims & WashersA shim etching service produces burr-free thin metal shims and washers with tight tolerances — stainless, copper and brass from 0.03 mm. -
Release Date：2026-11-02Custom Nameplate Etching for Branded Metal PlatesCustom nameplate etching turns your artwork into durable metal plates — logos, faceplates and asset tags with no tooling cost and fast samples. -
Release Date：2026-11-02Nameplate Chemical Etching for Metal Tags & LabelsNameplate chemical etching cuts graphics and serials into aluminum and stainless — burr-free, paint-filled, built to outlast printed labels. -
Release Date：2026-11-02Mesh Chemical Etching for Burr-Free Metal MeshMesh chemical etching forms uniform apertures in stainless, nickel and copper — 0.02 to 1.5 mm stock, no woven nodes, no burrs. -
Release Date：2026-11-02Custom Shim Etching for Precision Metal Shim PartsCustom shim etching cuts burr-free metal shims to ±0.05 mm — stainless, copper, brass and nickel from 0.03 to 1.5 mm, no tooling cost. -
Release Date：2026-11-02Mesh Etching ServiceA mesh etching service produces burr-free metal mesh with uniform apertures, smooth edges and no woven joints — in stainless, nickel, copper and brass.
Tags
Recommended News
-
Release Date：2022-03-10
Solutions for the Automotive Industry
-
Release Date：2022-03-10
Medical, precision engineering industry solutions
-
Release Date：2022-03-10
Electronics, 3C industry solutions
-
Release Date：2022-03-10
5G Industry Solutions
-
Release Date：2022-03-09
Semiconductor, LED industry solutions
Online Inquiry
Phone Contact