Common Problem
-
The etching process will create connection points, is it acceptable to the customer?
Flat etched products will have connection points. Thin material: for 0.1~0.3m thick material, the size of connection point is about 0.5mm, and the connection point of thick material products increases accordingly. The position of the connection point is placed on the parallel straight edge of the product as much as possible. The design of the connection point has two types of projection and notch. Generally, the functional product is designed with concave type, and the appearance product is designed with projection type, and the connection point is removed.
-
Are the walls of the etching process holes vertical? Are there burrs?
The effect of the hole wall processed by the etching process is related to the thickness of the material, the thinner the thickness, the hole wall is vertical, no rolled edges, and no pitting. Miss Kui (yu): 136 2020 3959
-
Can titanium be etched?
Hello! We are specialized in etching titanium materials, commonly used are TA1 TA2 TA4 AC4, etc.!
Online Inquiry
Phone Contact